Clean A Tank 500 g

Close menu Product information "Clean A Tank 500 g" Special agent for cleaning tanks from limescale deposits and blocked pipes. With citric acid. Removes bad, foul flavour from the water. Tip: Then clean the system with Pura Tank and keep it permanently fresh with Aqua Clean. 500g is sufficient for 50 litres. quickly and thoroughly cleans and removes limescale deposits and foul odours from drinking water tanks and systems. with the natural power of citric acid works automatically and effectively also suitable for coffee machines and kettles Application: Empty your water tank completely. Mix the appropriate amount of Clean a Tank with slightly warmed water. Dosage: 50g CLEAN a TANK to approx. 5 litres of water The concentration should be increased for heavy limescale build-up. Now pour the solution into the tank until the base is well covered. Now turn on the taps so that the solution can also run into the hoses. Leave the solution to stand in the tank and hoses for 5-6 hours. Then pump out and rinse briefly with fresh water. Repeat the process if there is a lot of limescale. The entire system should then be cleaned with Pura Tank without chlorine. Attention: Store in a dry place!!! Contains: less than 5 % anionic surfactants Data sheet for information to the public according to Annex VII section D: CITRIC ACID, Reaction product of Benzenesulfonic acid, 4-C10-13-sec-alkyl derivs. and Benzenesulfonic acid, 4-methyl- and sodium hydroxid. Safety informationAttentionHazard warnings:H319 Causes serious eye irritation.H335 May irritate the respiratory tract.Safety instructions:P101 If medical advice is required, have packaging or labelling ready.P102 Keep out of the reach of children.P280 Wear protective gloves/protective clothing/eye protection/face protection.P260 Do not inhale dust/fume/gas/mist/vapour/aerosol.P337 P313 If eye irritation persists: Seek medical advice/attention.